If you decide to use the 12V cigarette lighter outlet then you can run the power cable in any direction that you see fit. If you chose to go with the 12V plug-n-play solution that I wrote about, then the path to route cables is towards the driver’s side of the vehicle. Two cables will attach to the camera – 1) a power supply cord 2) a cable that connects the front camera with the rear camera. The BlackVue HD + WiFi front camera will mount directly under your rear-view mirror. It might even be helpful to pull this page up directly from your Model S browser and have it handy during the install. Make sure you’ve read through this installation guide and have a mental map of what needs to be done before beginning. I should mention all of the supplies can be used for other future projects too. Electrical tape (optional) for taping down excess wire to prevent slack rattle.You can also go the completely free route by using a bent wire coat hangar. I found a 36″ snake on Amazon for $13 which served me well. A snake with the light on the end will go a long way. A long and thin cable snake that you’ll use for feeding the BlackVue cable through tight and difficult to reach spots.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |